LCD / PLASMA MOUNTING BRACKET WITH TILT SUITS 37-52"

Model TV302B

» Box Dimensions : 29X9X2.5Inch
» Box Weight : 11 Lb
» Color : Silver

Universal 36-52" LCD Plasma TV wall mount

Will support 36" 37" 40" 42" 46" 47" 50" 51" 52" flat panel LCD and Plasma HDTVs Up to 15 degrees of screen down tilt with easy to tighten screen tilt locking levers

Maximum Weight Capacity : 155lbs.
TV stays 3.5" away from the wall. Fixing Hardware Is Included
28" Wide wall plate wupports block wall installation or installation on wall studs.
3 pass through holes so that cables and cords can be fished into the wall interior for a clean installation look
This universal wall mount attaches to any flat screen with a mounting hole pattern up to 28" (711mm) wide by 21" (534mm) tall.
Safety screws to keep the TV secure from slidding out from the side. Hardware for mounting on the wall and screws for TV included

If You Are Not Satisfied With This Product, Simply Return It To Our
Office Complete, In Original
Packing For A 100% Refund

Shipping Costs Are Not Refundable

We Are Confident In The Build Quality And Finish Of Our Product, We Offer An Australia Wide 3 Year Unconditional Warranty.

Our Product Is Designed For Indoor Use Only

Easy DIY Installation

WHEN FIXING TO GYPROCK WALLS BE SURE TO ACCURATELY LOCATE AND FIX TO A TIMBER / STEEL STUD

STAGE 01

On the wooden frame walls find a studs using stud finder of by drilling 1/8 diameter holes studs typically located 16" apart. ( steel frame walls drill 5/8" diameter 16" a part holes close to steel members use 4 1/4"x3" toggle bolts with flat washers instead of lugs, 2 on the top and 2 on the lower perforated openings of the plate)

Use the Wall Plate as a template to mark 4 hole's locations on the wall. Drill 2 3/4" dip holes at the desired height on the center of wood studs using 1/8" drill bit and insert with 3/16x3' lag screws through the plate with washers shown in Diagram 1.

Make sure the plate is level against the wall.

STAGE 02
Place the two wings seated at the back of the plasma screen with screws to be anchored. Attach the wings mounted (shown in Diagram 2) to the oriented plate Diagram 1)

STAGE 03
The two wings must be fastened to the edge of the plate. falling from the top location into the bottom one. An adjustable range from 5 to 15 degrees can be adapted to a proper location showed from a best view. Fix it with a nut by a special spanner.
(Sample Only - Each Bracket Contains Specific Mounting Instructions On Product Box, Fixing Hardware (Included) May Alter From One Model To The Next)

We Deliver Australia Wide Using Registered Post
(Insurance Included)

Adelaide Metro - $12.99	Perth Metro - $22.50
Melbourne Metro - $16.50	Brisbane Metro - $22.50
Sydney Metro - $16.50	Tassie / NT Metro- $27.50
Canberra - $16.50

Add $3.50 For Non Metro Deliveries

Payment Required Within 3 Days
Of Auction End / Buy It Now

Paypal : No Surcharge or Premium
Cash : On Collection In Adelaide
Direct Deposit : To Our CBA Account
Over The Counter : At Any CBA Branch
Money Orders / Cheques : Subj To Clearance

Please Use Your OZtion User ID As Payment Reference